Purpose: Aluminium facades are intended for use in office buildings, public buildings, retail trade and consumer buildings, exhibition buildings, hotels, residential buildings, sports and entertainment buildings, banks, factory buildings.
NONTRADITIONAL VIEW AT THE ARCHITECTURAL FORMS
LÜMICO facades systems allow to create a fully glazed facade. We fulfill even the most unusual forms of light protective walls, many-sided roofs, skylights and other spatial constructions. Various types of glazing with safety glasses of all available types.
COMPLIANCE WITH THE REQUIREMENTS
We will pick the right façade and skylight system in accordance with the individual requirements of the builders and designers. The technical department will provide appropriate technical assistance, starting from the design stage, the calculation of the statics, to the choosing the shape and color, and the implementation of the project. Our products meet strict European standards.
LÜMICO Facades systems allows to use the maximum potential of light. LÜMICO facades and skylights have the best sealing performance, sound and thermal insulation as well as high strength characteristics that allow you to secure glassed monumental structures.
We offer products that meet all requirements of building regulations in the area of fire safety. In order to fulfill these conditions, we use profiles with appropriate fire resistant and non-combustible content. We provide facades and skylights in fire resistance classes, which limits the flow of temperature and fire for respectively 15, 30 and 60 minutes.
ADVANTAGES OF ALUMINIUM
Aluminum is one of the most durable materials, which has a high impact performance, burglary and fire resistance, as well as bulletproof.
Complete freedom of choice of colors, styles, shapes, sizes, types of openings, accessories – will allow you to implement any stylistic ideas in the interior and exterior of the house.
Comfort – is the foundation of “cozy” house. Aluminum systems provide you with comfort in the house of their functionality and ease of use that are achieved: a wide variety of types of openings, self-regulating ventilation system, energy efficiency and ease of maintenance.
Price and quality
We used the system to meet the highest technical requirements and standards. Therefore, we provide a 10 year warranty on the system: on aluminum profiles, painting or anodizing, as well as insulation. In the accessories we provide a 5-year warranty.
Aluminium – durable material with “green” environmental component, which can be reused again and again.
Aluminium systems will give you the opportunity to provide a warm and comfortable temperature in the house and still have very high energy efficiency.
FAÇADE SYSTEM: MULLION-TRANSOM WALL MB-SR50N HI
The structure presented here is a version of MB-SR50N featuring enhanced thermal insulation performance.
The system is designed for the construction and execution of flat, light-weight curtain walls of the suspended or filling type, roofs, skylights and other structures. The shapes of profiles enable selection of mullion and transom profiles which flush with each other on the inside surface of the façade.
The MB-SR50N HI system features basic characteristics and possibilities inherent in the base construction MB-SR50N. The thermal insulation zone deserves a particular mention, though. Here, special two-component insulators have been applied. They are based on a HPVC insulator (or a set of insulators of appropriate width), identical to the one used in the standard MB-SR50 system, which makes it possible to drive screws with high accuracy during the installation process at the building site. On both lateral surfaces of the insulator additional elements made of flexible material are attached (glued on), which enhance thermal insulation performance and limit the air flow in the space separating the infills of the façade. The insulator built in this way enables maintaining convenience and accuracy of mounting of a traditional façade, ensuring at the same time that very good thermal insulation parameters are attained – the heat transfer coefficient, depending on the applied profiles and accessories spans between 0.94 to 1.94 W/m2K. Likewise in the base version of the façade, the structure allows for installation of different types of infills, including glazing of large dimensions and two-chamber insulating glazing units. With regard to active elements, the MB-70HI doors and windows featuring enhanced thermal insulation performance are particularly recommended for façades of the HI series.
The MB-SR50N HI system was subjected to thorough testing performed by the Building Research and Testing Institute IFT Rosenheim and attained very high technical parameters.
Air infiltration: class AE 1200, EN 12152
Rainwater tightness: class RE1500, EN 12154
Resistance to wind load: 2.4 kN/m2, EN 13116:2002
Impact resistance: class I5/E5, PN-EN 14019
As regards the declaration of conformity for vertical façades based on the MB-SR50N HI system, a harmonized European Standard PN-EN 13830 “Curtain Walling. Product Standard” has been applied as a reference document.
OUR LAST COMPLETED PROJECT
TRÄ DEKOR (LAMINAT)
Group I – Imitation wood
Golden Oak – renolit 2178001
Swamp Oak – renolit 3167004
Nut – renolit 2178001
Mahogany – renolit 2178001
Group II – Imitation wood
Oregon – renolit 1192001
Douglas Fir – renolit 3069037
Winchester XA – renolit 49240
Natural Nut – renolit 4252041
Mountain Pine – renolit 3069041
Light Oak – renolit 3118076
Cherry – renolit 4252043
Walnut – renolit 4252042
Macore – renolit 3162002
Siena PR Rosso – renolit 49233
Siena PN Noce – renolit 49237
Dark Oak – renolit 2178001
Chocolate Brown – renolit 887505
Anthracite – renolit 701605
Navy Blue – renolit 515005
Green – renolit 612505
Cream – renolit 137905
Grey – renolit 715505
ACRYLCOLOR dark brown
ACRYLCOLOR silver, similar to RAL 9007
ACRYLCOLOR silver, similar to RAL 9006
Extra colours for the S 9000 series
RAL 9010 – white
|Air infiltration:||class AE 1200 EN 12152|
|Rainwater tightness:||class RE1500 EN 12154|
|Resistance to wind load:||2.4 kN/m2 EN 13116:2002|
|Impact resistance:||class I5/E5 PN-EN 14019|